- Iron fallout removal, chemical decon, full clay bar treatment — every panel, arch, and door jamb stripped to a contamination-free surface
- Multi-stage paint correction under studio lighting — every panel inspected microscopically. All swirls, defects, and buffer trails corrected before coating is applied.
- IPA panel wipedown — every corrected surface stripped of all polish oils so the coating bonds directly to raw, clean paint
- Premium graphene ceramic coating — panel by panel, correct flash times — applied from our accredited brand portfolio. Manufacturer warranty included.
- Controlled cure + panel-by-panel inspection under studio lighting — the vehicle does not leave until it passes our final inspection
- Premium aftercare kit + full briefing — correct products, correct technique, everything to protect the investment
Why your car will come back perfect — not just clean.
Unlike mobile detailers or open-air shops, every square metre of our studio has been engineered for one job: perfect ceramic application. These aren't upgrades. These are the baseline, on every single vehicle.
- Purpose-built enclosed studio bay. Climate-controlled, dust-filtered, humidity-stable. Ceramic coatings cure under precise conditions — temperature and humidity swings create streaking, uneven bonding, and premature failure. Driveway and open-shed installs cannot control any of this.
- Engineered lighting angles — swirl detection at the microscopic level. High-CRI LED arrays positioned specifically to reveal every defect, hologram, and buffer trail. If we can't see it, we can't correct it. Shops using hand-torches or natural light miss 60–80% of surface defects — which then get permanently sealed under the coating.
- Full decontamination before a drop of coating goes on. Iron fallout, tar, industrial fallout, embedded contamination — all removed chemically and mechanically, then inspected. Ceramic is semi-permanent. What's under it stays there. We don't coat over problems.
- Multi-stage paint correction — not a one-pass polish. Test panels first, pad and compound matched to your paint, final refinement pass to restore true gloss. The coating then bonds to corrected paint, locking in the finish for the life of the product.
- Full wheel decontamination — all four wheels, faces, spokes, barrels, inner rims
- High-temperature wheel ceramic — withstands brake heat cycling, repels brake dust bonding, resists acid cleaners
- Hydrophobic glass ceramic on all exterior glass — rain sheets off at driving speed, UV filtered, optical clarity maintained
- Dramatically reduced maintenance — brake dust doesn't bond, glass contamination doesn't stick
- Full interior detail and surface preparation — every surface cleaned and degreased first
- Ceramic leather coating — bonds into the grain, UV-stable, stain-resistant, crack-preventing
- Nano-fibre fabric protection — seats, carpet, floor mats — hydrophobic barrier without altering texture
- Alcantara and suede treatment — specialist product for the material
- Door cards, headlining, pillars across all applicable surfaces
- NSW VLT compliance confirmed for your specific vehicle and window position
- Full glass clean and prep before installation
- Studio installation — enclosed, dust-free — eliminates the bubbles that happen in open-air installs
- Nano-ceramic film — genuine IR heat rejection, 99% UV block, zero signal interference
- Front bumper — full coverage — takes the brunt of stone chips and highway debris
- Bonnet — full or partial — depending on coverage preference and budget
- Front guards + headlights — commonly chipped by debris thrown from the front wheels
- A-pillars + mirror caps — small but high-visibility, commonly damaged areas
- Door handle cups + sill edges — fingernail scratches, key rash, entry-point wear
- Premium self-healing urethane film — full-body coverage — every exterior panel: bonnet, guards, doors, roof, rear quarter, bumpers
- Custom computer-cut templates — exact fit for your specific vehicle, edges wrapped where possible, no visible seams on body panels
- Multi-year manufacturer warranty — covers yellowing, cracking, peeling, and delamination for the life of the warranty
- Self-healing top layer — minor scratches and swirl marks disappear with heat (sun or warm water)
Why your PPF will look invisible — not patchy.
Unlike mobile installers or open-air workshops, our studio has been purpose-built for one thing: flawless PPF application. These aren't add-ons. These are how every film install is done, every time.
- Purpose-built enclosed studio bay. Dust-filtered, humidity-controlled, temperature-stable. A single speck of dust trapped under PPF becomes a permanent visible blemish that can only be fixed by re-installing that panel. Open-air installs cannot eliminate airborne contamination — we can.
- Engineered lighting angles — edge-perfect inspection. High-CRI arrays positioned to reveal every edge, every lift, every micro-bubble. PPF edges that aren't wrapped or sealed correctly lift within months. We see every millimetre before you leave.
- Full paint decontamination + correction before film is laid. Every swirl, defect, and contaminant addressed first. PPF magnifies whatever's underneath — tiny imperfections become visible every time the sun hits the panel. We correct first, then protect.
- Computer-cut templates + hand-wrapped edges. Panel-specific cuts for exact fit. Edges wrapped where panel geometry allows — not butted against body lines where dirt and water get trapped. No visible film edges on body panels.
- Premium graphene ceramic applied over the cured PPF — bonds to the film surface, compatible chemistry
- Hydrophobic top layer — water sheets off, bird lime and tree sap wipe away, reduces bonded contamination
- Easier maintenance — washing time halved, no need to wax PPF, cleaner finish between details
- UV protection boost — adds a second UV barrier on top of the PPF's own UV inhibitors, extends film life
- Full interior detail and surface preparation — every surface cleaned and degreased first
- Ceramic leather coating — bonds into the grain, UV-stable, stain-resistant, crack-preventing
- Nano-fibre fabric protection — seats, carpet, floor mats — hydrophobic barrier without altering texture
- Alcantara and suede treatment — specialist product for the material
- NSW VLT compliance confirmed for your specific vehicle and window position
- Studio installation — enclosed, dust-free — eliminates the bubbles that happen in open-air installs
- Nano-ceramic film — genuine IR heat rejection, 99% UV block, zero signal interference
Trust the work.
Ricky does it personally.
Ricky is one of Sydney's most experienced detailers and PPF installers. Accredited by GTechniq and Kovalent, backed by over 15 years of hands-on industry experience, and personally responsible for every vehicle that comes through the studio.
Every car that comes into Sydney Detail Studio is handled by Ricky himself. No juniors. No apprentices cutting their teeth on your paint. No shortcuts because someone's learning. Every step — decontamination, correction, coating application, PPF installation, final inspection — same pair of hands, every time.
That's why the accreditations mean something. That's why the result is consistent. That's why you're here.
Trusted by Sydney's most discerning car owners — and not a single one has left disappointed.
Four reasons the same names keep coming back — and keep sending their friends. Don't take our word for it. Search us up. Check the reviews. The story's the same on every one.
Not a single review below five stars. Not one.
One hundred and eighteen five-star reviews on Google. Zero fours. Zero threes. Zero twos. Zero ones. In a market where even the top-tier shops average 4.7–4.8, Sydney Detail Studio sits at a flat 5.0 — and has done for years. Every single client who has taken the time to write a review has left the maximum score. The name on the review? It doesn't matter. The pattern is identical — someone describing work that genuinely exceeded what they paid for.
Officially certified applicator. Not a reseller, not a retailer.
Two premium coating manufacturers — GTechniq and Kovalent — have put Ricky through their training, tested the work, and warranted him to apply their product in Sydney. That's not a marketing badge. It means the manufacturer is willing to stand behind the coating only because the person applying it has proven, repeatedly, that they can. The coating on your vehicle is matched to its surface and paint system — not forced into a one-size-fits-all sell.
Every car done by Ricky personally. No apprentices. Ever.
Over fifteen years Ricky has personally corrected, coated, installed PPF on, and protected thousands of vehicles — from daily drivers to six-figure exotics. That experience doesn't just sit on a wall as a certificate. It's what tells him when to stop cutting paint, when to switch pads, when a panel needs a different product, where a PPF edge needs to be wrapped. Details that new technicians don't see yet. When you book Sydney Detail Studio, you get Ricky. Not a junior being trained on your paint. Not a rotating team. Same pair of hands, every time, for every step.
Professional detailing facility. Zero dust contamination.
Every stage of the process happens inside our Smeaton Grange studio — decontamination, correction, coating application, PPF installation, cure, inspection. No open-air work. No driveway installs. No dust, pollen, or wind-borne debris landing in wet coating or getting trapped under a PPF edge. Under professional studio lighting we can see every imperfection at the microscopic level — which is the only way multi-stage correction works. Studio conditions are what separate work that genuinely protects from work that just sits on the surface.
Don't believe any of it? Search us up on Google. Every review is public. Every word is theirs, not ours.
Real Words From Real
Sydney Clients.
"Ricky and the team did an outstanding job on my GV70 — it looked brand new when I picked it up. Had the full front PPF and ceramic coating done, quality is excellent. They even redid the ceramic on my passenger door free of charge after it got scratched from a door ding. Highly recommend."
"I recently had a Graphene Coating applied to my brand new car. It's newer technology than ceramic coating and comes with a 9-year warranty. Mr. Singh did an amazing job; he's clearly very passionate about car detailing. I found him pleasant, professional, and — most importantly — honest. Highly recommended!"
"Really happy with the experience. Ricky was very friendly and knowledgeable and took great care with the car. Had the ceramic coating, windows tinted and interior protection done and I'm so impressed with the result. Very competitive pricing as well. If you need your car protected and treated like a VIP don't hesitate to book in."
"Had a great experience with these guys! Most competitive price I found for ceramic coating and tinting but didn't sacrifice quality and service. They actually went above and beyond, refusing to be paid for additional work. Highly recommend to anyone in the Macarthur area who loves their car — make that anyone in Sydney. I'll definitely be back."
"We had our BMW ceramic paint protection done along with interior and PPF protection, and window tinting. Absolutely fantastic outcome and the car looks amazing. Extremely happy with the results. Would highly recommend using this team."
"Took my M3 in for full front PPF and ceramic. Ricky talked me through every step and didn't try to upsell me on anything I didn't need. The attention to detail is next level — edges are invisible, finish is mirror-glass. Worth every dollar and then some. Wouldn't take my car anywhere else."
Now that you know what's included,
finish the deal.
Text us on the number we've been chatting on and we'll lock it in. Same inbox, same response time — just reply with your go.
Start a Fresh QuoteWhere you'll find us.
